Linear Stepper Actuator with Integrated Drive

JVL

Motori Lineari Passo Passo con Elettronica Integrata - MIL34x
MIL34x

Description

Linear stepper motors can dramatically reduce cost and save space.
There is no coupling, no additional bearing support and no assembly work required. This not only reduce cost but also reduce failure rate due to the less number of components and more simple construction. In applications with small load ratings a linear guide is also not required. The special design and material of the nut secure long life operation.
 
Below versions can be delivered:
  • Non-Captive linear actuator with nut inside motor. Linear moving part can rotate so it should be fixed.
  • External linear actuator. Nut are mounted on lead screw.
  • Captive (will be available for NEMA34 in the future) and External linear actuator in NEMA size 23 and 34 can be delivered with integrated driver or controller.
 
On request:
  • Different shaft and stroke length
  • Precision ball screw
  • Special nut design
  • Higher IP protection
CANopen, EtherCAT, ProfiNET, EtherNet_IP, ModbusTCP
IP 55
All fieldbuses available
Integrated drives

Technical Spec

0

Highlights

  • Thrust forces: up to 2700 N
  • Linear speed: 1.3 to 152.4 mm / s
  • External Lead Screw available in the following materials: plastic, bronze or ball screws (1 mm or 5 mm step / rev)
  • Can be supplied with anti-backlash nut
  • Screw length and pitch available on request
  • Travel per Rev.: from 0635 to 25.4 mm
  • Motor + drive used: MIS34x
  • Industrial Ethernet (Profinet. EtherCAT, Ethernet IP, SERCOS III, Modbus TCP, Powerlink)
  • RS485, MODBUS RTU and CANopen
  • Integrated PLC with 8 digital I/O
  • Single or multi-turn Absolute Encoder (409,600 count/pass)

Request a quote

Luca Nicola
Luca Nicola
This email address is being protected from spambots. You need JavaScript enabled to view it.












I have read the privacy policy and I consent to the processing of my personal data in line with EU regulation 2016/679.*

I consent to the processing of my personal data for the purposes described under the point 2 of the privacy policy (Marketing and newsletter activities).*

Are you a robot?*

* I campi indicati sono obbligatori
Ready to find out more?