Multi-Axis Controllers

Galil

Econo DMC 21x3
Econo DMC 21x3

Description

Galil's DMC-21x3 Ethernet motion controllers are designed for extremely cost-sensitive and space-sensitive applications. The DMC-21x3 controllers are available with a variety of plug-in, multi-axis amplifier boards that are designed to eliminate the wiring and any connectivity issues between the controller and drives. Plug-in amplifiers are available for driving stepper, brush and brushless servo motors up to 500 Watts. Or, the DMC-21x3 can be connected to external drives of any power range.
 
The DMC-21x3 series is available in one through eight axis versions and can be configured for control of step or servo motors on any combination of axes. It measures just 4.25" x 7.0" for one through four-axis models and 4.25" x 10.75" for five through eight axes. With a 32-bit microcomputer, the DMC-21x3 controllers provide such advanced features as PID compensation with velocity and acceleration feedforward, program memory with multitasking for simultaneously running eight applications programs, and uncommitted I/O for synchronizing motion with external events. Modes of motion include point-to-point positioning, position tracking, jogging, linear and circular interpolation, contouring, electronic gearing and ecam.
 
Like all Galil controllers, programming the DMC-21x3 is simplified with two-letter, intuitive commands and a full set of software tools such as GalilSuite for servo tuning and analysis.
Up to 32 I/O (expandable to 72 + 8 analog in)
Ethernet, RS232
1-8 axes
Integrated drives

Technical Spec

0

Highlights

  • Number axes: up to 8
  • Communication: Ethernet 10BASE-T; RS232 (19.2kb)
  • Integrated Drives: Servo and Stepper
  • Sampling Time: up to 125 µs /axis Control
  • Filters: PID with speed and acceleration feedforward, notch filters and low-pass
  • Mode Movement: jogging, point-to-point positioning, tracking, contouring, linear and circular interpolation, Electric axis and Electronic Cam
  • Auxiliary Encoder: 1 per axis Dedicated
  • Inputs: 1 Home + 2 Limit per axis
  • Digital I/O: 8 inputs + 8 outputs (cards 1-4 axes); 16 inputs + 16 outputs (cards 5-8 axes), optically isolated with ICM-20105 Analogue
  • Inputs: 8 with AMP-SDM-205x0 and 206x0
  • Expansion I/O: 40 TTL with DB-28040

Request a quote

Massimo Redaelli
Massimo Redaelli
This email address is being protected from spambots. You need JavaScript enabled to view it.












I have read the privacy policy and I consent to the processing of my personal data in line with EU regulation 2016/679.*

I consent to the processing of my personal data for the purposes described under the point 2 of the privacy policy (Marketing and newsletter activities).*

Are you a robot?*

* I campi indicati sono obbligatori
Ready to find out more?