Multi-axes controller

Galil

Scheda Assi - Econo DMC - 18x2
Econo DMC - 18x2

Description

The DMC-18x2 Series are PCI bus motion controllers designed for the most cost-sensitive applications. The DMC-18x2 controllers accommodate 1- through 4-axis formats and allow control of step or servo motors on any combination of axes. Any mode of motion can be programmed including linear and circular interpolation, contouring, electronic gearing and ecam. To minimize cost, the following features are not available on the DMC-18x2: five through eight axes of control, optical isolation on inputs, dual encoder inputs, and the auxiliary FIFO and DPRAM communication channel. If you need these features, select the DMC-18x6 Accelera PCI controller. Like all Galil controllers, programming the DMC-18x2 is simplified with two-letter, intuitive commands and a full set of software tools such as GalilSuite for servo tuning and analysis.
8 in, 8 out
PCI
Cost-effective
1-4 axes

Technical Spec

0

Highlights

  • Number axes: up to 4
  • Communication: PCI bus Integrated
  • Drives: no Sampling
  • Time: up to 62 µs / axis
  • Control Filters: PID with speed and acceleration feedforward, notch filters and low-pass
  • Mode Movement: jogging, point-to-point positioning, tracking, contouring, linear and circular interpolation, Electric axis and Electronic Cam
  • Auxiliary Encoder: 1 per axis
  • Dedicated Inputs: 1 Home + 2 Limit per axis
  • Digital I/O: 8 inputs + 8 outputs
  • Analogue inputs: no I/O
  • expansion: no

Request a quote

Massimo Redaelli
Massimo Redaelli
This email address is being protected from spambots. You need JavaScript enabled to view it.












I have read the privacy policy and I consent to the processing of my personal data in line with EU regulation 2016/679.*

I consent to the processing of my personal data for the purposes described under the point 2 of the privacy policy (Marketing and newsletter activities).*

Are you a robot?*

* I campi indicati sono obbligatori
Ready to find out more?